Please view our list of
standard calibration charges for gages
submitted for inspection and calibration. Gages may be submitted from any manufacture for
these rates to apply. Our inspectors make sure that the gages conform to the appropriate
specification governing the type of gage being calibrated.
Standard Calibration charges will apply if gages certify.
If a gage does not conform, our standard
procedure is to notify you of the discrepancies and what the charges will be
to repair or replace that gage, and long form certifications are required..
In the event the gage is reconditioned or replaced, the
will be charged in full in addition to the reconditioning or new
replacement costs. If you decline the repair/replacement recommendation then
the full calibration charge will apply and the gage is returned with the as
found condition noted and marked "OUT OF TOLERANCE" on the certification. This
will also happen if we do not receive a decision from your company, as to what
to do with the gage, within 10 work days after you have been notified. If your
company requires long form certifications on reconditioned, or new replaced
gages, the certification charges will be an additional $20.00* per member.
* Safety Related, Nuclear, Expedited or Non Published calibration
charges are priced upon application. All calibration charges are charged
in full regardless of